How To Take Washing Machine Apart
How To Take Washing Machine Apart. Lift off the end caps which sit on the console by prying them from the back of the washer. Remove the rear wall of the machine by unscrewing the bolts that secure it.
You can remove the drum on a washing machine yourself, without the help of specialists the decision to disassemble the drum on a home washing machine can com. You need to detach the control board. Unplug the machine so you don't get shocked.
Check If There Are Any.
Use a putty knife inserted between the toe panel and front panel of the washing machine to disengage the toe panel retaining clips. Pull the toe panel away from the washing. The front panel is the top panel that you.
The Clips Are Three Inches From Each Side Of The Amana Washing Machine.
Locate the two large brass clips under the console. Disconnect the maytag washing machine power cord from the wall. You need to detach the control board.
On Some Washers, You Will See The Screws From The Front, Some You Will Have To Snap A Cover Off To See The Screws And On Some Washers The Screws Will Be On The Back.
Pull the washer away from the rear wall and set a bucket under the water supply hoses at the back panel of the washer. Removing the console from washer. Hook yourself up with a fixed washing machine.
Turn Off The Water At The Wall Spigots.
Check out my whirlpool washer disassembly videos. Use a screwdriver to remove the toe panel securing screws at the bottom of the toe panel. Remove the front panel see also how to test a washing machine motor?
How To Take Apart A Ge Topload Washer Or More Specifically, How To Take The Front And Top Panel Off On A Ge Top Load Washer.
By looking at the construction diagrams of the parts it can be known how to take apart the machine. Disconnect the power to the machine and move it out from the wall to allow access to the back side of the machine. Remove the two screws (one on each side) that hold the control panel on.
Post a Comment for "How To Take Washing Machine Apart"