Installing A Washing Machine

Installing A Washing Machine. There is water still in the lines and that will leak on you floor so have that towel handy. After, unplug the machine’s electrical cord from the outlet.

How to Install a Washing Machine from www.thespruce.com

There is water still in the lines and that will leak on you floor so have that towel handy. After, unplug the machine’s electrical cord from the outlet. Firmly grasp it and pull it out of the rear.

Source: www.thespruce.com

To properly experience our lg.com website, you will need to use an alternate browser or upgrade to a newer. Measure the doorway and plan the washing machine’s placement.

Source: www.youtube.com

There is water still in the lines and that will leak on you floor so have that towel handy. How to install a washing machine step 1:

When Install The Washing Machine, Make Sure That The Required Connections Are Within Easy Reach.

After, unplug the machine’s electrical cord from the outlet. Attach drain hose to drain port. Placement of the new washer on top of a compatible washer of the same brand using a new or compatible existing laundry stacking kit.

Move The Washing Machine Into The Room With A Helper.

Switch off the cold water supply isolating valve; Move washing machine away from wall to create room for installation. Place a bucket on the floor or in the sink and run water through the hot.

If You Don’t Have The Correct Plumbing Set Up, You’ll Need To Get A Qualified Plumber To Make Adjustments Before You Install Your New Washing Machine.

Place one end of the vent hose over the vent hole in the back of the dryer. Then follow the below steps: You need to place the outlet box between two studs on the wall behind or near the washing machine.

Learn How To Use, Update, Maintain And Troubleshoot Your Lg Devices And Appliances.

Steel braided washing machine hoses. Confirm the washer power cord is accessible and drape it over the top of the washer so it’s not hanging down behind the appliance. Slide the washer close to its final location.

Before Touching The Hoses, Turn Off Your Washing Machine By Cutting The Power At The Breaker Box.

Run some water through faucets. The hose should not be kinked or damaged. Learn how to install a washing machine to upgrade your laundry experience.