Front Load Washing Machine Won't Drain
Front Load Washing Machine Won't Drain. Drain hose kinked or drain clogged. Take the cover off the filter, and then disconnect the hose that is connected to the pump filter.
Your washer’s pump is usually located behind a panel in the front or back of the machine. Washers need to be installed at a certain height from the. Locate the lower panel below the washer door.
Make Sure Your Washer Is Level.
If you notice cracks or tears, replace the pump. Open and remove the service flap on the washer’s bottom right corner. If the blades are broken or the pump is leaking, you may need a new one.
Turn Off Your Washer And Have A Bucket Ready.
Unfasten the drain hose and remove the plug. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If the washer isn't level it may not drain correctly.
Take Out The Screen And Rinse It Thoroughly.
Remove the screws and lift off the front panel. This is located on the front of your washer at the bottom left corner. Disconnect the hoses connected to the drain pump.
Unplug The Washing Machine From The Power Socket Or Turn The Circuit Breaker Off.
Extra low, low or no spin option selected. For many models, it is normal to have pauses between cycles of up to 3 minutes. Inspect the pump for cracks or leaks.
Delicate Or Handwash Cycle Selected.
See if your washer will start with the door switch depressed with your finger. A consistently unbalanced front load washer can also damage internal parts, resulting in costly repairs. Here are the steps for troubleshooting:
Post a Comment for "Front Load Washing Machine Won't Drain"