Why Is My Washing Machine Not Draining

Why Is My Washing Machine Not Draining. This can result in suds building up near the drain. Remove the pump from the washer.

Why is My Washing Machine Not Spinning or Draining Properly? from gizmatools.com

A broken lid switch or belt could also be the culprit. If the pump is running. While this is certainly annoying, this problem is very common and can be easily fixed by yourself.

Source: gizmatools.com

The purpose of this article is to help you, the reader to be able to possibly do some troubleshooting and discover the likely cause of the problem. Your washer may have a clogged drain hose or the pump may be broken.

Source: www.youtube.com

Disconnect the drain pump wire connector. The most common reason why your whirlpool washer isn’t draining completely is a blocked or clogged drain hose or drain pump.

Use A 5/16 Inch Socket To Remove The Drain Pump Mounting Screws.

The hose that carries water from the back of the machine could be causing it not to drain properly. Thankfully, the first two reasons are relatively easy to check and fix. Your washer may have a clogged drain hose or the pump may be broken.

There May Be A Clog.

Press start to resume the cycle or you can select drain & spin and press start. If you are still experiencing issues after following the instructions in our guide, please contact beko’s customer service at 0333 207 9710 for assistance. Then, lay the washer on its front to access the drain pump underneath the washer.

Disconnect The Drain Pump Wire Connector.

If your washing machine is not draining properly, then most likely there is something that is blocking the drain hose. It could also be due to excessive suds, a slow spin cycle, or low outlet voltage. Turn off the washer and check the level.

We Do Not Recommend That You Try To Repair The Appliance Yourself.

It may even be something as simple as the the hose being jammed. Things that can often be found causing blockages in this washing machine drainage are: Pull the washing machine out, remove the drain hose, and remove any debris with a brush or drain snake.

This Is Usually Due To The Washing Machine Drain Hose Being Bent Or Stretched Or The Drain Pump Filter Being Blocked.

The washing machine hose could have a kink obstructing the water flow, or the unit could be jammed too close to the wall, interfering with water flow through the hose. If water remains in the washer, check for a pinched or flattened drain hose. The machine seems to be working fine.