Singer Hand Sewing Machine How To Thread
Singer Hand Sewing Machine How To Thread. Now push the foot controller at full. Insert the bobbin into the case and pull out 5 inches of bobbin thread.
Pull thread gently into the thread cutter/holder to cut and hold it in place. Thread the top of the machine. By the guide hole, you have to put the thread up in the little plastic guide.
Marked By A Number 1 And An Arrow.
Always, always raise the presser foot lifter before you start threading the machine. Learn how to thread your singer® sewing machine including upper thread, bobbin winding, pulling up the bobbin thread, adjusting thread tension and more!for m. Now, insert the bobbin into its slot in such a way that you can see 5 inches of bobbin thread coming out of the thread guide hole.
Now Push The Foot Controller At Full.
Push and spot the bobbin there, and after this, you will find it has attached to the machine. Keeping the tension on the thread, pull it around to the back of the machine. He also shows how to load the bobbin and how it threads once you start off.
Into The Spool, When You Engage The Bobbin, You Will Find There Is A Tiny Spring.
Take the thread and pass it around the second thread guide on the machine. Place your thread on the spool pin. Run the thread from the spool through the hole/hook in the thread guide that is on top of the.
Singer Sewing Machine Thread Guide.
Hook thread to the thread. This will tighten the thread. You'll notice that next to the numbers on your machine you'll see a series of arrows.
How To Thread A Singer Sewing Machine Heavy Duty?
Use a spool cap to help prevent the thread from getting caught on any irregularities that might be on the thread spool itself. Make sure the thread is taught and properly hooked before you proceed to the next hooking point. Use a clockwise motion to unwrap your thread from your spool.
Post a Comment for "Singer Hand Sewing Machine How To Thread"