Washing Machine Fuse Location
Washing Machine Fuse Location. You know you have a blown thermal fuse in this washer when the control panel lights up but the motor doesn’t run; Check the fuse box on your washer.
In addition, you should investigate and resolve the problem that caused the fuse to. Check your house fuses, circuit breakers, and the wall outlet. Once the clog is removed, the power will restore.
The Lid Switch Assembly Containing The Fuse, On A Maytag Washer, Is Located Behind The Control Panel Console.
That’s a blown thermal fuse. Pay attention to places where such a fuse is most likely to be installed: Let’s hope this will help you to get started.
But In The Russian And Chinese Models, The Installation Of Such Parts Is Counted In Isolated Cases.
You know you have a blown thermal fuse in this washer when the control panel lights up but the motor doesn’t run; Remove the two screws that hold the lid switch in place, then remove it from the machine. There should be one located somewhere near the washing machine.
If The Fuse Does Not Have Continuity, Replace It.
Removal of the control panel is required to check or replace the fuse. Make sure the hot and cold water valves are fully open. To get your washer to work properly and get started, we have compiled a.
Unplug The Washing Machine From The Electrical Outlet.
Here’s what it looks like: Cliff.witt looks like the only fuse is on the inverter just below connector cn5. If the washer overheats, the thermal fuse will blow.
Make Sure That This Is Correct And Sound, As In Well Connected And Undamaged.
You check the status led on the motor (see this post for more on that) and it’s dead, no lights, nuttin’. Samsung washing machine fuse location. To determine if the thermal fuse is at fault, use a multimeter to test it for continuity.
Post a Comment for "Washing Machine Fuse Location"