How To Install Ice Machine
How To Install Ice Machine. Whenever installing a new ice machine, clearance is incredibly important to the placement of the unit. To install the ice maker, open the freezer door and bring out the shelves in it.
Each type of floor drain has its benefits when it comes to your ice machine’s installation setup. On the back of the refrigerator, locate the sticker where the water inlet tube will be. To do this, find a wire harness or circular filter cover on the top left corner of the freezer.
Expose The Water Inlet Opening.
Toll the waterline down and run it through the refrigerator hole. This sounds like a dismal outlook for the ice machine. Ensure that the sides and back of the machine are at least 5 inches away from any walls.
However, Some Models Will Require An Oval Box.
So you can access the icemaker wire harness. Find a position for your ice maker, preferably away from direct sunlight or other heat sources. Unplug the ice maker machine from an electrical outlet.
The Auxiliary Grill Kit Offered (Only On Customized Panel Models) Can Be Used To Align The Toe Grill With The Rest Of The Cabinets While Not Obstructing The Airflow Of The Ice Maker.
But, most of the ice makers do need a drain for proper functionality. Remove the ice tray rack from the freezer (some models). The ice maker will snap into place.
No, Ice Makers Cannot Be Installed Without A Drain.
Make sure the ice maker water channel is under the water fill tube, and then slide the ice maker on the 2 side wall shoulder screws. Vent the ice machine and bin drains separately. Once you have your spot picked out, use a drill or saw to cut out a hole that’s slightly larger than your outlet box.
The Fishbox Is Just Aft Of A Bulkhead.
Any access tubing must be looped under the water inlet valve and secured behind the retaining clip. If you cannot find it, it implies that you’ll have to install an ice maker water line first. Lift the freezer shelf up and out.
Post a Comment for "How To Install Ice Machine"